VoltWikiIf a Bosch NGM burner will not light, turn it off, inspect the cooled burner parts and spark, and use the complete E-Nr retry timing.
Platform: Ngm Gas Cooktop
Bosch · Cooktops
Bosch Cooktops problems
10 source-linked troubleshooting answers, organized by what the appliance is doing or displaying.
- Symptoms
- 7
- Behavior
- 1
- Error codes
- 2
Troubleshooting answers
Symptoms
If one Bosch gas-cooktop flame is low or uneven, cool the cooktop and check cap position, dry burner parts, and accessible grooves.
Platform: Ngm Gas Cooktop
Bosch igniter keeps clicking?
Platform: Gas
Photograph the Bosch induction display and record whether one zone or the whole cooktop shuts off before any reset erases the state.
Platform: Standalone Induction Cooktop
A flashing Bosch induction setting means the pan was not accepted; verify a suitable centered base, then preserve the one-pan comparison.
Platform: Standalone Induction Cooktop
Photograph the Bosch induction panel before reset; a blank surface and a powered panel with a visible state require different checks.
Platform: Standalone Induction Cooktop
Note whether the Bosch induction setting flashes or stays steady; an accepted pan that remains cold requires zone-output diagnosis.
Platform: Standalone Induction Cooktop
Troubleshooting answers
Behavior
If a Bosch induction lock symbol is visible, use only the complete E-Nr unlock procedure and record any failed response on a clean, cool panel.
Platform: Standalone Induction Touch Cooktop
Troubleshooting answers
Error codes
Bosch F2, F4, or E7015 means induction electronics overheated and the affected zone shut off.
Platform: Standalone Induction Cooktop
Bosch U400 means supply voltage is outside the normal range; preserve the code and E-Nr for measured branch and connection checks.
Platform: Standalone Induction Cooktop